|
|||
|
|
|
||||||||
|
Using "U" channel to secure a fixed panel or a bath screen is one of the simplest and best ways. The edges of the glass is ground & polished into a straight line. The "U" channel is installed so that it conforms to the shape of the wall. When the glass is received by the "U" channel the curve in the wall is hidden. The "U" channel also adds additional adjustment flexibility in setting the door gaps. Verify & Layout: The first step in a install is to layout the unit, and verify sizes of each panel. If you don't have the original marks on the tile from the measure, you should layout the unit verifying the measurements and put small marks on the tile indicating the centerline of the glass. Cutting the "U" Channel: The "U" channel can be cut using a circular saw with a carbide blade, or with a hack saw. The "U" is shipped cut to the approximate lengths needed for each install. Trim the "U" channel pieces so that they fit the spaces. Sand or file the ends to remove any saw marks. Drilling Holes: The kit is shipped with #8 x 1 1/2" counter sunk stainless steel screws. It is important that when installed that the head of the screws are flush with the inside surface of the "U" channel.
Install the Glass: The glass sizes were adjusted to for the thickness of the "U" channel and the 1/8" setting block. Place setting blocks about 1" in from each end of the bottom "U" channel. Double check that the "U" channel is clean of any foreign material, no screw heads sticking up and the setting block are placed correctly.
|
||||||||
