Shower Door GEN037 Hinge

PROFESSIONAL SELF-CENTERING HINGE FOR 3/8" or 1/2" GLASS

Important Information:
This hinge contains a dual degree pivot pin. The pivot pin is set for normal door closing position. This allows the option to have the door swing both in and out. In installations where closing pressure is needed for a strike seal you have the option of altering the closing position of the door 5 degrees inward by utilizing the opposite side of the pivot pin, which has been pre-machined. This feature can be implemented in the field

Specifications:

Glass Sizes:

3/8" (10mm) to 1/2" (12mm) thick tempered safety glass

Construction:

Solid brass

Closing Type:

Self-centering when within 15° of closed position

Cutout:

Required-Non slip style

Includes:

Gaskets, screws and template

Gaskets:

3/8" Glass:

Use one thick gasket on each side

1/2" Glass:

Use one thin gasket on each side

*NOTE: Do not exceed either maximum weight or width when choosing proper quantity of hinges.


	Crystalline Images 1990 Hartog Drive San Jose, CA 95131 Telephone 408-988-4377 Fax 408-988-4423		Electronic mail General Information: sales@crystallineimages.com Sales: sales@crystallineimages.com Customer Support: Webmaster: jerry@crystallineimages.com